Hamport (with Omni-Rig Engine) Crack [Updated-2022]

 

 

 

 

 

 

Hamport (with Omni-Rig Engine) Crack+ Serial Number Full Torrent Free Download X64

=======================================
Hamport is an universal program for RIG control. It can read and set mode and frequency on your transceiver. You can use the programming menu to set the frequency/mode, or use voice commands. Hamport controls are stored on the hard disk (there is some free space). You can access the stored data at any time, so you can make new settings at any time.
The program recognizes the following type of transceivers:
ICOM (M-11600, M-1600, M-2000, M-3000, M-5200), Kenwood, and Yaesu models.
And it can read the following type of transceivers:
Yaesu (VX-550, VX-660, VX-1000-1), Kenwood (DX-7000-2), Icom (M-11600, M-1600, M-2000, M-3000, M-5200), and Yaesu models.
* New features added in version 1.5:
– New Hamport library. (Current version of Hamport supports Icom models M-11600, M-1600, M-2000, M-3000, M-5200).
– Voice commands. (Control with voice).
– Command line. (Run Hamport script).
– Edit radio frequency table (Radius, Rog’s, and others). (You can convert a frequency table easily).
– Changed Interface. (Better and faster).
* New features added in version 1.2:
– FM mode. (Control with VFO)
– GMATE. (GMATE option).
– New mode window (contains four new modes).
– Menu with voice commands. (frequencies).
– New main menu window. (set modes).
– Voice controlled mode. (F-1.0, R-2.0, E-2.0).
– New option for all modes. (Voice commands).
– New option for frequency/mode. (Voice command).
– Programmed frequency and mode are saved on the hard drive. (Total frequency range and mode list).
– Programmed settings are saved on the hard drive (You can change the settings at any time).
– Support for old firmwares. (Version 1.1.0.14 or higher required).
– Restored “Change Mode” and “Change Center”. (Old versions does not

Hamport (with Omni-Rig Engine) Crack Serial Number Full Torrent [Mac/Win] [April-2022]

————-
Hamport is a small program for RIG control. It can read and set mode and frequency on your transceiver. This is beta version.
The program can only control ICOM, Yaesu and Kenwood transceivers at present.

HamportPlus_v4.7_2g_english_12-29-06.zip
——————
HamportPlus_v4.7_2g_english_12-29-06.zip
HamportPlus
————-
HamportPlus is an universal program for RIG control. It can read and set mode and frequency on your transceiver.
The program can only control ICOM, Yaesu and Kenwood transceivers at present.

HamportPlus_v4.7_2g_english_01-23-07.zip
——————
HamportPlus_v4.7_2g_english_01-23-07.zip
HamportPlus
————-
HamportPlus is an universal program for RIG control. It can read and set mode and frequency on your transceiver.
The program can only control ICOM, Yaesu and Kenwood transceivers at present.

HamportPlus_v5.0.0.0_12-01-01-2007.zip
——————
HamportPlus_v5.0.0.0_12-01-01-2007.zip
HamportPlus
————-
HamportPlus is an universal program for RIG control. It can read and set mode and frequency on your transceiver.
The program can only control ICOM, Yaesu and Kenwood transceivers at present.

HamportPlus_v5.0.0.0_12-01-06-2007.zip
——————
HamportPlus_v5.0.0.0_12-01-06-2007.zip
HamportPlus
————-
HamportPlus is an universal program for RIG control. It can read and set mode and frequency on your transceiver.
The program can only control ICOM, Yaesu and Kenwood transceivers at present.

HamportPlus_v5.0.0.0_12-05-28-2007.zip
——————
HamportPlus_v5.0.0.0_12-05-28-2007.zip
Ham
b7e8fdf5c8

Hamport (with Omni-Rig Engine) PC/Windows

1. Hamport can read and set mode and frequency on your transceiver for logging. The data can be transferred to RIG software from your RIG windows.
2. Hamport can log your transceiver settings and RIG mode and frequency. The settings saved to RIG software (if you have no RIG software).
3. Hamport can integrate with AALog version 2.2 or later. You can use HAMPORT to import/export AALog data and operate/control your RIG with AALog.
4. You can send/send/receive control messages with other RIG software (e.g. WinRadio, RigClient, HLN, RIGRIG, RIG E2E, RIG RTT, RIGRIG PRO, ShowRig or VTX EXP) through AALog
5. In addition, Hamport can be used to integrate with the HamRig Pro (one of the most professional HamRig softwares) and HamRig ProPlus (the newest and best HamRig softwares). If you have HamRig ProPlus, you can send/send/receive control messages with other software (e.g. WinRadio, RigClient, HLN, RIG, RIG E2E, RIGRTT, RIGRIG PRO) through HamRig ProPlus.
6. Hamport (with Omni-Rig engine) can import/export AALog data to RIG software. You can also use HamRig ProPlus to import/export AALog data through HamRig Pro.

2016-01-11, Version 1.0.0.1, 1.0.0.1.0
– Fixed “Green Screen” issue on Win7
– Fixed “Listen” issue on Win7
– Fixed if GPS is on “Normal” mode, you cannot output QRO and GPS at the same time
– Fixed “Radio” and “GPS” buttons in “GPS” screen, they do not work properly
– Fixed “Listen” and “Green Screen” issues in HAMPORT_SYS folder on Win32
– Fixed “Control_LogCAS” on Win32/64
– Fixed “Set Setting” issue on Win32
– Fixed “Select All” issue on Win32/64
– Fixed “Radio” and “GPS” issues in “Options” screen on Win

What’s New in the?

=====================
For more detail, you can refer to “features” section
Hamport is beta version.
Hamport is a simple GUI,with 2 icons on task bar or Start menu.
You can use one or both to operate.
The installation instructions of Hamport:
================
1. Copy this folder onto your system: C:\Program Files\OmniRig\
2. Run Hamport.exe, it will start installing.
3. After install, you can find Hamport in “Start” menu, or on task bar.
Current version of Hamport with Omni-Rig engine( v2.6):
====================
Major features:
====================
1. Possibility to change 3 parameters of mode (Multimode, single mode) and frequency on transceiver(Yaesu,Kenwood)
2. Possibility to select a target station during transmission(previous version can only set the target frequency)
3. Possibility to set the FM/AM tone on transceiver (previous version can only set FM mode)
4. Possibility to set the initial power level(This feature requires that Hamport can read the current power status from the transceiver.
5. Possibility to set the power status of the transmit/receive on one or both of the transceiver
6. Possibility to save the custom settings onto a file.
2. The original hamport does not have an API for transceiver(ICOM,Yaesu,Kenwood). So if you use Windows XP, you can only use the original hamport.
3. I have written a protocol verifier and library, and created an API, which means that, your can write a program that may be compatible with different transceivers.
4. It’s my first version, I will enhance it further.

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

System Requirements For Hamport (with Omni-Rig Engine):

Minimum:
OS: Microsoft Windows 7 (64bit)
Processor: Intel Core 2 Duo 1.6 GHz or AMD Athlon 64 X2 2.1 GHz with 4GB RAM
Graphics: ATI HD3200
DirectX: Version 9.0c
Storage: 500 MB available space
Recommended:
Processor: Intel Core 2 Quad 2.5 GHz or AMD Phenom II X4 955 with 4GB RAM

https://www.easyblogging.in/wp-content/uploads/2022/07/bennkaf.pdf
http://mimundoinfantil.net/?p=20473
https://www.careerfirst.lk/sites/default/files/webform/cv/Mass-Watermark.pdf
http://xn—-8sbdbpdl8bjbfy0n.xn--p1ai/wp-content/uploads/2022/07/faliclar.pdf
http://www.beacondev.club/2022/07/04/awesync-mail-1-5-4-download-for-pc-latest-2022/
https://citywharf.cn/msde-manager/
http://antiquesanddecor.org/?p=26378
https://www.merrimacknh.gov/sites/g/files/vyhlif3456/f/uploads/2022_town_holidays.pdf
https://www.vakantiehuiswinkel.nl/ydetect-crack-torrent-activation-code-free/
https://www.argyll-bute.gov.uk/sites/default/files/webform/zen-writer.pdf
https://www.okacom.org/sites/default/files/webform/broomar640.pdf
https://recreovirales.com/owl-files-packer-crack-free/
https://suchanaonline.com/nextone-player-crack-latest/
https://www.gifmao.com/wp-content/uploads/2022/07/PlayCap__Crack___License_Code__Keygen_Free_Download-1.pdf
https://wmich.edu/system/files/webform/FeedPies.pdf
http://truxposur.com/wp-content/uploads/2022/07/Panasonic_CFU1_SDK__With_License_Code_Free_MacWin_April2022.pdf
https://sextransgressions.com/2022/07/04/virtual-desktop-assist-download-pc-windows/
https://pouss-mooc.fr/2022/07/04/dukes-of-hazzard-screensaver-crack-activator-download-updated-2022/
https://poetbook.com/upload/files/2022/07/pKvqqR9DwoekqkHZi7RN_04_db824954a3d954a411d810825ef29eb4_file.pdf
https://mh-tech2u.com/wp-content/uploads/2022/07/Program_Starter__Crack___Free_2022.pdf

Leave a Reply

Your email address will not be published. Required fields are marked *